bat and insert where the original ld9x.bat was. (0 is A:\, 1 is B:\, ect.) Once that's all finished save the. The 2 after imgmount is what directory you installed your Windows 9x at, so if it's not on C:\ directory by default then change accordingly. Don't forget to replace the x in "W9x.img" with either 5 or 8 depending on which bat file you're editing. To fix, first open ld9x.bat (x being either 5 or 8) with a text editor and replace the line " imgmount d c:\W9x.img" with " imgmount 2 c:\W9x.img -size bps,spc,hpc,cyl -t hdd -fs none", and then replace "bps,spc,hpc,cyl" with a string of numbers indicating bytes per sector, sectors, heads and cylinders. The boot command tells DOSBox to boot from the floppy image U:mpayneDOSBoxImagesFloppy DisksMS-DOS 6.22 - 1.img, which is an image of the first of the three MS-DOS setup disks. It's asking for the size of the image being used. img but I do know that if you're using a custom-built image you created yourself through DOSBOX or similar then it gives off that message. This seems to be a bug in current versions (1.5.7) of the ImDisk driver.I figured out the problem in regards to that. This entry will only disappear next time you reboot your system. Z:>imgmount D file.img -t cdrom You can read details about all options supported by this command in manual (distributed with DOSBox) ( link to relevant description in my dosbox fork ). Note: When you mount two images to the same drive letter by accident, you will end up with an entry in the virtual drive table that no longer works, but you also cannot unmount (since it was already implicitly unmounted by being replaced with the new one). You can mount image files using imgmount command in DOSBox prompt, e.g. In contrast to other workarounds for multi-disk games, this solution should always work, since games and applications see the entire floppy disk including original media label (as for all intents and purposes, even DOSBox is unaware of the fact that it is not a real, physical disk drive). Moreover, DOSBox-X adds support for DOS/V and NEC PC-98 emulations so that you can play DOS/V and PC-98 games with it.ompared with. If you need to swap disks, you can return to the ImDisk configuration window, select the existing drive and unmount it, then mount the other image to the same letter. To expose the virtual floppy drive B: from Windows as drive A: in DOSBox. Once the virtual drive is mounted, you can now use the regular MOUNT command to expose it to DOSBox. Windows will probably complain about wanting to check the freshly mounted drive for errors, which you should skip. Choose your floppy image file, set the device type to Floppy, and choose other options as desired. By convention, you will most likely want to use A: or B: as a drive letter. dosbox and type these lines (pressing enter after every line) mount c c:dosprogs imgmount d c:dosprogsCM2ISOIMAGE.cue -t iso c: cd CM2 dos32a cm2. button, a new virtual drive can be created. It creates a new symbol ImDisk Virtual Disk Driver in the system control panel (users of Windows Vista and above will have to switch their control panel from category to symbol view to get the new option to show up). The driver can be installed and uninstalled without having to reboot Windows. Commands - DOSBoxWiki DOSBox ImgMount Geometry IMGMOUNT - DOSBoxWiki imgmount -size BytesPerSector, SectorsPerHead, Heads, Cylinders All hard drives (at least that I found or created) had 512 bytes per sector and 63 sectors per head. In contrast to alternative solution Virtual Floppy Drive, the ImDisk driver also works on 64-bit versions of Windows. In particular, it also supports mounting floppy images as virtual floppy drives, which makes it useful for playing multi-floppy games in DOSBox, as the internal IMGMOUNT command does not support floppy image swapping. The ImDisk Virtual Disk Driver is an open-source application for Windows that allows to mount image files as virtual drives in Windows.
0 Comments
Leave a Reply. |